TuningWorx Remap

Advice · 6 min read

How to prepare your car for a remap: a simple checklist

A healthy car is the best starting point for any remap. Use this checklist before your mobile appointment.

By the TuningWorx team ·

Close-up of a car engine bay

Service and fluids

Make sure servicing is up to date, with fresh oil and filters where due. If the car is overdue a service, book that first.

Check coolant and other fluid levels, and fix any leaks before your appointment.

Warning lights and faults

Engine management, glow plug or DPF warning lights should be investigated before a remap. Tell the team about any lights you’ve seen, even if they have since gone out.

Remapping is not a repair for an underlying mechanical fault.

Battery and tyres

A healthy battery is important for the software work. If your car has been slow to start, mention it when you book.

Tyres and brakes should be in good condition, as with any change to how the car drives.

Diesel owners: check emissions parts

DPFs, EGR valves and AdBlue systems should be healthy and fitted. If you’ve had DPF warnings or limp mode, get it looked at first.

Regular longer runs, such as a trip up the A19 or A1(M), help many diesels stay healthy.

On the day

Have a reasonable amount of fuel in the vehicle and remove anything plugged into the diagnostic port, such as a tracker dongle. Mention any aftermarket electronics you have fitted.

Details to have ready

Make, model, engine, any previous modifications and your postcode if you’d like a mobile visit. You can enter all of this on the enquiry form.

Quick questions

Enquire anyway and mention it. The team will advise whether it needs looking at first.

If servicing is due or overdue, it’s sensible to do it beforehand.

Related service: Performance remapping

Keep reading